DBA ROTORS 5000/ Brake job coming

[MEATHEAD1]

Time for a upgrade on the Duck 07 C6 Z06 50,000, looking at a rotors for the vette, And looking at doing this my self from rebuilding the calipers if need to flushing the whole system out ( and trust me it needs it) looking for DYI on this just in case I need a hand or I need special tools ect ect,
Thanks in advance
Vaughn

[PredatorC6]

I use the DBA 5000 2-piece rotors on the front and rear of my C6 what is equipped with the Z06 brakes. Its an easy install. Just remove the calipers, pull the original rotors off the wheel studs, slide the new rotors in place, then re-install the calipers. Probably a good idea to install new pads when installing new rotors, too.

If your car has 50k miles, the calipers should be fine, unless it's seen a lot of track useage.

[MEATHEAD1]

How are you liking those rotors so far?

[PredatorC6]

I've had zero issues with the DBA rotors. I don't track the car, so, do they perform better than the original rotors?
I really don't know.

[SCParts]

You have the 5000 series on the rear also? I did not think they made a 5000 application for the rear on any of the Corvettes?

Let me know, would love to see what you have.

Thanks,

Jim

Originally Posted by PredatorC6

I use the DBA 5000 2-piece rotors on the front and rear of my C6 what is equipped with the Z06 brakes. Its an easy install. Just remove the calipers, pull the original rotors off the wheel studs, slide the new rotors in place, then re-install the calipers. Probably a good idea to install new pads when installing new rotors, too.

If your car has 50k miles, the calipers should be fine, unless it's seen a lot of track useage.

[PredatorC6]

The rears are also DBA with the "Kangeroo Paw" holes and slots. They do not make a two-piece rear rotor to my knowledge. The centers are gold anodized to match the front.
Sorry, no pics.

[MEATHEAD1]

Originally Posted by SCParts

You have the 5000 series on the rear also? I did not think they made a 5000 application for the rear on any of the Corvettes?

Let me know, would love to see what you have.

Thanks,

Jim

Jim will be putting a order in soon with you guys same set up predator C6, if you can be so nice please send me price.
Thanks In advance
Vaughn

[SCParts]

Sure thing....do you have a Z06? Just want to make sure...

Bets bet is te 5000's on te front and 4000's for the rear...Let me know and I will get you a bundled price.

Thanks,

Jim

Originally Posted by MEATHEAD1

Jim will be putting a order in soon with you guys same set up predator C6, if you can be so nice please send me price.
Thanks In advance
Vaughn

[MEATHEAD1]

Jim its a Z06 07 please include pads hawk low dust
Thanks