I see a couple of the Corvette Parts places offer a deck lid to seat back bumper for convertible C3's. Zip has them listed as '68-'75.
Here is the example from Zip.
http://www.zip-corvette.com/ProductDetails/ProductDetails.aspx?pid={2EB9BF7A-40C1-4034-A0DC-FA58C9FBD054}&gid={1F13C30D-4ED2-4942-A7BC-1017BB8E0B9E}&pname=68-75+Deck+Lid+Bumper+-+Lid+to+Seat&Referer=&Alias=&ptct=SGR-SR&CTitle=&
I called Zip and the parts guy indicates it is a stock Corvette replacement part. I looked in the AIM and don't see any such part listed or instructions for installing it. ???
The deck lid on my '70 did have paint that was chipped by the seat back. So these seem like a good idea. Usually the AIM's have dimensions on exactly where to drill holes.
What year were these implemented?
Specifically (dimensions) where are these installed?
Perhaps someone can scan in an AIM sheet that has the dimensions.
Any help appreciated, thanks.
Here is the example from Zip.
http://www.zip-corvette.com/ProductDetails/ProductDetails.aspx?pid={2EB9BF7A-40C1-4034-A0DC-FA58C9FBD054}&gid={1F13C30D-4ED2-4942-A7BC-1017BB8E0B9E}&pname=68-75+Deck+Lid+Bumper+-+Lid+to+Seat&Referer=&Alias=&ptct=SGR-SR&CTitle=&
I called Zip and the parts guy indicates it is a stock Corvette replacement part. I looked in the AIM and don't see any such part listed or instructions for installing it. ???
The deck lid on my '70 did have paint that was chipped by the seat back. So these seem like a good idea. Usually the AIM's have dimensions on exactly where to drill holes.
What year were these implemented?
Specifically (dimensions) where are these installed?
Perhaps someone can scan in an AIM sheet that has the dimensions.
Any help appreciated, thanks.