Hi all,
I've been working with carbon fiber and fiberglass for a while now, especially with more expensive cars. I recently finished a M5 and an Aventador.
I've decided to make a mold from the hood from my '76 that I gave to a friend but will be bringing it back so I can do so. Just wondering if anyone is interested in one or other parts. First I will make a mold for the stock hood and later will graft a L-88 scoop into it and make a mold of that one as well. I can make cheaper versions that are 100% fiberglass, fiberglass with a carbon fiber outer layer, 100% carbon fiber, as well as carbon fiber/kevlar hybrids.
I was thinking of doing seat backs or other interior, maybe T-Tops as soon as I have the time.
Again, just gauging interest for the Corvette community.
I think this would be a great idea. Cost would be the deciding factor.
As my car is complete, I most likely would not be interested at this time, but I definately would have been interested when I was building my car. I bought new hood, t tops, spoilers, bumper covers, and would have loved CF mirrors.
I'd think it would be a great market, if it's affordable.
Other parts, either full CF or CF covered, would be interior console covers, dash/guage clusters, Halo panels, interior door panel/trim, seats....
I had a similar operation startup expected this spring but unfortunately my machine shop burnt 2 days after Christmas. This has pushed me back close to a year as I rebuild the shop I earn a living in. My mentor from Cali will still be here in a month or two to get me back on track with my hobby business. Good luck!
I am in the finishing stages of a mold for a generic 14" air cleaner which I'll be offering in carbon fiber if anyone likes. I'll post pics of my first one. I had done an Edelbrock piece, but due to obvious copyright issues will not be having it available to everyone :laughing: .
I am in the finishing stages of a mold for a generic 14" air cleaner which I'll be offering in carbon fiber if anyone likes. I'll post pics of my first one. I had done an Edelbrock piece, but due to obvious copyright issues will not be having it available to everyone :laughing: .
CF hood would be cool. CF t-tops or a one piece CF top would be cool too. I have a long L88 scoop I was going to mold on my factoy hood (because the ecklers just doesn't fit as well). It might make a good mold/donor.
What are you using for an outer layer of clear on the cf parts? Auto urathane? Poly? Epoxy?
Like previously stated.....price would be a deciding factor.
I would be interested in a L88 hood or a Motion knock off style for my 69, short style maybe in fiberglass with a kevlar outer skin... That would look great!artyon:
Along with a complete console and dash bezels. I LOVE the idea of a one piece top to replace the individual t-tops. A bottom plate to seal off the bottom of the car from the nose back to the front crossmember along with a rear plate to seal from wheel well-wheel well back to the rear bumper.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Corvette Forum : DigitalCorvettes.com Corvette Forums
2.2M posts
119.2K members
Since 2003
A forum community dedicated to Corvette C Series owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!