Originally Posted by Maniacmechanic1
Try taking a can of carb cleaner and spray down with the nozzle direct into the primary Qjet Air Bleeds.
They tie intersect direct with the Idle Tubes that go down into the main well where the primary jets are.
Then into the idle down channels.
Should blast dirt and gum out.
I am working today and all week.
And working on Race cars after hours too.
Thanks, I'll try that tomorrow...'if' the Jets/Metering Rods are gummy would that stop the solenoid from chattering?
What's odd, this problem came on rather quickly and maybe a coincidence shortly after I filled the tank with Gas.