Corvette Forum : DigitalCorvettes.com Corvette Forums - View Single Post - Crate 350/290 Deluxe Build
View Single Post
Old 10-31-2019, 01:22 PM   #12
KacyC3
DC Crew
 
KacyC3's Avatar
 
Posts: 353
Member #118574
Member since: Mar 2012
Location: Port St. Lucie FL

My Corvette(s)
C3

Thanks: 0
Thanked 22 Times in 22 Posts
Crate 350/290

isnt this a terrible build?

TECH SPECS
Part Number: 19244450/19355659
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10066034): Cast-iron with 4-bolt main caps
Crankshaft (P/N 10243070): Nodular iron
Connecting Rods (P/N 10108688): Powdered metal steel
Pistons (P/N 93422884): Cast-aluminum
Camshaft Type (P/N 3896962): Hydraulic flat tappet
Camshaft Lift (in): .450 intake /.460 exhaust
Camshaft Duration (@.050 in): 222 intake / 222 exhaust
Cylinder Heads (P/N 93438649): Iron; 76cc chambers

Valve Size (in): 1.94 intake / 1.50 exhaust
Compression Ratio: 8.0:1
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Regular pump
Ignition Timing: 34 Total @ 4,000 rpm
Maximum Recommended rpm: 5,100
Balanced: Internal
Intake Manifold (P/N 10185063): Dual Plane


sounds like miss matched parts to me
KacyC3 is offline   Reply w/quote
406 Fastburn heads, E1067, 700r4, 355's, Holley EFI