F/S:Vortech v3 supercharger Si-trim
I have used Vortech v3 supercharger Si-trim No damage at all had extra rebuild bearings with it there will not be a problem. with all parts except mounting bracket to engine A&A corvettes sells them at great prices this supercharger is a counter clock wise rotation its polished and very clean it has a 6 rib pulley with no shaft play or scaring on housing to suspect any unnecessary play this unit is capable of 775hp max and 22 lbs of boost max with upgraded intercooler all parts are from Vortech and all match I have pictures of everything this would be a great unit for an LSX build but works well with other types of engines .I t doesn't include any fuel system you should buy it alone and this kit will fits all the Gm but you need the correct bracket for your engine . The things you get in this kit is the supercharger the steel braided lines the oil cooler the blow off valve and silicone connectors for plumbing there is other things in this kit such as water cooled intercooler but it's only good for 7lbs so for the amount of lbs you want to push you will need an aftermarket intercooler plumbing there is a kit you can buy with all of that for 187 on eBay they hold extremely well you will need to buy a mount from A&A corvettes that will have a bigger pulley for you to spoil quicker . It need injectors and boosta pump and snorkel or snail can be turned for better and fitment and mounting bracket to engine thats what all you need to complete installation . all the hardware are including with it. the system was pulled from corvette c5 engine and it will fits for the anther engines if they add the parts that i have mentioned it in the previous line . if any one are interested let me know .