Here's 3 pics I took tonight to give an idea of where I am on the project.
LS3 from 2010 SS Camaro
T-56 6 speed and bell housing from 98-02 F-body
Speed Direct upper A arms
Speed Direct Steeroids
Modified water pump housing to clear upper A arm
Everything powder coated, dust shields & caliper bracket re-plated zinc chromate
All brake lines fabricated in house using stainless steel tubing
Body lifting fixtures fabricated in house for 2 post lift
Differential upgraded to 3:54 and rebuilt by V-tech
Trailing Arms rebuilt by V-tech
Composite rear spring by VanSteel
Custom fuel tank by VetteWorks (uses OEM pump mounted to the right of the gas tank filler tube
LSx adapter plates by VetteWorks
Rear half-shaft using Spicer non-lubricating (no zerks), a little hard to find but I have a partnumber if anyone is interested.
I have recorded many measurements and tool partnumbers for all of these mods so far. Engine/trans placement proved to be a bit critical. Accordingly, I have learned many things about what WONT fit! I am more than happy to share what I've learned with more in depth descriptions and photos, so if anyone interested just ask!