Corvette Forum : DigitalCorvettes.com Corvette Forums banner

control arm bushing poly

  1. '69 control arm bushing install

    '69 control arm bushing install

    torque collar bolts to 40 ft-lbs and you're ready to install your ball joints!
  2. '69 control arm bushing install

    '69 control arm bushing install

    the end of the cross shaft will not be flush with the front of the bushing. The inner sleeve will also protrude past the end of the cross shaft.
  3. '69 control arm bushing install

    '69 control arm bushing install

    press in the rear bushing
  4. '69 control arm bushing install

    '69 control arm bushing install

    insert the cross shaft
  5. '69 control arm bushing install

    '69 control arm bushing install

    press in the front bushing first!
  6. '69 control arm bushing install

    '69 control arm bushing install

    sand ID of control arm hole to ~1.320" and ~1.250 for the outer and inner holes respectively and coat with anti-sieze
  7. '69 control arm bushing install

    '69 control arm bushing install

    press inner sleeves on cross shaft
  8. '69 control arm bushing install

    '69 control arm bushing install

    installing poly bushings in lower control arm
  9. '69 control arm bushing install

    '69 control arm bushing install

    poly bushings disassembled
  10. '69 control arm bushing install

    '69 control arm bushing install

    poly bushings
Top