Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1991 Power Windows Switch

1037 Views 13 Replies 4 Participants Last post by  Frankylo
By anychance does anyone know or have a diagram of the Passenger Side Switch on my 1991. I am not sure what wire is for what to check it out.... because the fuse is good, Drivers Side works Fine, and passengers side switch looks popped oout of place... Thanks for all help in advance

Frank
1 - 3 of 14 Posts
Franky -

You need to invest in a Factory Service Manual. The manual and the supplement will have wiring diagrams and troubleshooting charts to help you figure out this problem (and other questions that you've posted).

The Helms price for the manual is $95. This ebay auction is $99 or best offer. There are other '91 FSM auctions also going on, so this isn't the only one.

http://cgi.ebay.com/ebaymotors/1991...018QQitemZ280096316864QQrdZ1QQsspagenameZWD1V

I can take a look at my '95 FSM, and it may be the same as your '91 with respect to wiring the PW circuit - but you really NEED the FSM if you plan to do your own repair work.

Steven
Franky -

Does the driver side switch lower the passenger side window (and the passenger side switch does nothing)? If it does, then my '95 FSM says to replace the passenger side switch.

Steven
OKay we know now the Pass switch is good..

did you remove the door panel?

Check the voltage at the moto while moving the switch in one direction or another.. maybe the motor is bad.

:agree:

It's probably either the motor (most likely) or an open ground.

Steven
1 - 3 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top