Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter #1
Hey Guys

I got 19" x 9.5 45mm offset all around, should be here Thursday

Would I have problems running the BFG KDW2's

Front - 265/30 ZR19 - Rim width range 9-10" Overall Diameter 25.4"
Rear - 295/35 ZR19 - Rim width range 10-11.5" Overall Diameter 27"

Or should I go with the 255/35/19 Overall Diameter 26" for the fronts?

Is 265 too wide? I don't want to worry about rubbing.

Would the 265 look funny being shorter?

Stock 01 coupe lowered on stock bolts, no cut bushings.

I want to order these tonight so I can get them mounted this weekend

Thanks,

Mike
 

·
Premium Member
Joined
·
17,444 Posts
I don't know if they will fit , but you might check with one of our tire vendors. They should be able to give you the answer
 

·
Registered
Joined
·
39 Posts
Discussion Starter #4
Thanks guys,

I ended up going with 255/35 and 295/35 because the the overall diameters were 26" and 27". This was closer to stock and didn't want as much of a gap in the front with the 265/30

Mike
 

·
Registered
Joined
·
337 Posts
Hey Guys

I got 19" x 9.5 45mm offset all around, should be here Thursday

Would I have problems running the BFG KDW2's

Front - 265/30 ZR19 - Rim width range 9-10" Overall Diameter 25.4"
Rear - 295/35 ZR19 - Rim width range 10-11.5" Overall Diameter 27"

Or should I go with the 255/35/19 Overall Diameter 26" for the fronts?

Is 265 too wide? I don't want to worry about rubbing.

Would the 265 look funny being shorter?

Stock 01 coupe lowered on stock bolts, no cut bushings.

I want to order these tonight so I can get them mounted this weekend

Thanks,

Mike
+45mm offsets are not common for a C5, are you positive your info is correct ?....If you have pics please post them :cheers:
 
1 - 5 of 5 Posts
Top