Corvette Forum : Corvette Forums banner

1 - 1 of 1 Posts

38 Posts
Discussion Starter · #1 ·
I'm frame off restoring a 74 that was originally a 350 car but I now have a gen v 454. I was hoping to use the brackets that came on the motor to convert to a serpentine drive setup but I temporarily bolted the power steering and alternator bracket on and i'm concerned about hood clearance. Since I don't have my fenders to reference I was hoping someone would be able to give me some input based on these pictures.

The bracket is much taller than the radiator support but Isn't as tall as the air cleaner.


I know the hood slopes down to the radiator support and thats where my concern comes in. I cant afford a fancy March system so any input would be appreciated.
1 - 1 of 1 Posts