Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
Hey...
Been busy lately driving the vette round as it's running like a dream but as usual i found something else that the guy who had it before me didn't do... i now have the Air Dam / spoiler for the front and went outside into the oven we like to call Burbank this afternoon to install it... and guess what... the welded nuts on the frame were caked in all sorts of filth! best thign is the bolts are missing... SO...

Without me going to the hardware store and buying one of every type of bolts (thread size etc) will fit down there?

Thanks guys
 

·
Registered
Joined
·
910 Posts
Pretty sure they are 1/4-20.
If they are that corroded, take a tap and chase the threads to be sure.
Find a Pro auto body/paint supply near you. They will have the proper black/phos bolts with the large loose washer built in and you can probably buy them by the piece.
Best part is the NCRS guys won't tell the diff.:D
 
1 - 3 of 3 Posts
Top