Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1 (Edited)
I finally fixed the problem with my engine that would not stay running.

2 years ago I bought a K&N air filter , they have a coating of oil on them and my car has the MAF sensor, the oil ended up on the sensor an caused it to stop working, causing the engine to run for only 2 seconds and not go into the run mode. the second I removed the plugin from the MAF the engine ran fine. so I replaced the MAF and now it starts right up an runs great.I WILL BE SWITCHING TO A WICKS AIR Filter.
This problem was a real needle in the haystack. Thank all of you for your support in troubleshooting this problem.
 

·
Registered
Black 08, A&A TI supercharger. Kooks headers. CCW wheels. Much more
Joined
·
12,668 Posts
Keep in mind you can just spray electric cleaner to clean the MAF elements.No need to buy a new MAF.Had to do this on my c4 and c5 after a filter clean/oil.
 

·
Registered
Joined
·
30 Posts
Discussion Starter #5
Keep in mind you can just spray electric cleaner to clean the MAF elements.No need to buy a new MAF.Had to do this on my c4 and c5 after a filter clean/oil.
That was the first thing I did , it did not fix it.
 
1 - 5 of 5 Posts
Top