AFS changed black a-mold design!
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
LT1 C4 needs some help
C4 CorvetteSo a couple weeks ago I picked up a 1995 LT1 C4 Corvette. 137000 miles automatic. Completely stock. Test drove it and it ran great. Drove it a couple days and everything was great. Once getting it home I was cleaning it up and cleaned the engine. Yes i now know not to get the optispark wet. The...- 9
- 184
-
86, OBD1 adaptor to OBD2, Bluetooth scanner, window 8 phone
C4 CorvetteI have an 86 and I would like to have a blue tooth scanner that I can read with my windows 8 phone or a small tablet. General readout things, oil pressure temp etc I can purchase an adaptor cable to convert OBD1 to OBD2 and then a blue tooth scanner, but my Questions are: 1. Does it work? 2...- 4
- 2K
-
Identity vacuum hose please
C4 CorvetteHey guys , I am in the middle of a rough idle work up. Removing the passenger side injector cover , I immediately noticed a short vacuum line that was not connected to anything. Can you please tell if it is normal. I found info on LT1 but little on the 96 LT4 It is the hose with red tube stuck...- 7
- 175
-
1987 Vette - runs rough and rich, dies
C4 CorvetteHi, I have a 1987 Vette. It is running very rich, blows black smoke rich, and when it begins to warm up it starts to run rough and acts like its loading up. When you give it some Rpm's it gets a miss and when returned to idle it dies. Now after letting it sit and coming back to mess with it, it...- 16
- 2K
-
WTB: C4 Convertible Removable Hardtop
C4 CorvetteI'm inheriting a C4 from an uncle. It's an '87(?) with a 4+3 and a soft top. The cloth is in bad shape and I suspect even the convertible frame needs replacement. Rather than spend the time and money, since I will be using this car for track/hillclimb/autocross duty, I'd prefer to use a...- 0
- 191
Join now to ask and comment!