Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I have done a search and could not find an answer. I have a 86 coup and have a problem with the center section of the front air dam. It sits very low and is not streight, it is actualy bent down a little. It looks like there needs to be a support in the center pulling the dam up, but I can't see any thing for it to attach to at the top. It could attach to the center bolt of the air dam where it attaches to the bottom lip of the radiator opening. Any info or if possible pictures. Thanks for the help.
 

·
Registered
Joined
·
284 Posts
Yes, that body-colored piece that goes across the front of the condenser is actually called a "radiator grille" in the parts department at the dealer, and is still available from the dealer if you're missing it. And you may be missing that little s-shaped bracket, as the other poster said, which attaches to the baffle, and another bracket that goes on top of the "grille". These things all combine to keep the center section up. For illustrative purposes, here are the parts, although you could get them from other catalogs too:

http://www.ecklers.com/product.asp?pf_id=25100&dept_id=1431

http://www.ecklers.com/product.asp?pf_id=42612&dept_id=1463

http://www.ecklers.com/product.asp?pf_id=29166&dept_id=1431
 
1 - 3 of 3 Posts
Top