Joined
·
178 Posts
Hey any one on here have local inside information on vette community in pheonix? :thumbsup:
airzona C3 folks
1 - 13 of 13 Posts
Joined
·
797 Posts
Check out ACE: http://arizonavette.net/forums/index.php?
I log on there, but haven't done much "live" stuff because I am in frame off status with my '69 Coupe and can't drive it. I'm in Chandler btw :thumbsup:
I log on there, but haven't done much "live" stuff because I am in frame off status with my '69 Coupe and can't drive it. I'm in Chandler btw :thumbsup:
Joined
·
178 Posts
thanks for the link
hey thanks what kind of 69 are you building?
hey thanks what kind of 69 are you building?
Joined
·
797 Posts
It's a small block coupe. Started with an all original 350hp/4spd car that sat 20 years and needed a total resto. It had a pretty scaly frame, so I located a nice clean one (blasted and powder coated) over in Cali for the build-up. I'm sticking with the original motor (just rebuilt) but went with a keisler 5 spd. The entire chassis is pretty much done now, and I went with a glass rear spring, super struts and Koni shocks. The trailing are rebuilt (sent them out) as well. Up front I installed a steeroids rack, new springs, sway bar, powder coated A-arms, poly bushings, etc.. Brakes redone at all 4 corners. Ran stainless fuel and brake lines. Lot's left to do but I'm making progress.
Here's a few pics:
![]()
![]()
![]()
Here's a few pics:
Joined
·
178 Posts
looks good
hey nice job it is looking real good so far doesn't look like your cutting any corners on her keep up the great job you should post your pic,s in the c3 area if you haven't allready done so the guts there would enjoy seeing them.
again great job. i just bought my first vette friday it 1979 can't wait to get it home so i can start playing too. have a great day
:thumbsup:
hey nice job it is looking real good so far doesn't look like your cutting any corners on her keep up the great job you should post your pic,s in the c3 area if you haven't allready done so the guts there would enjoy seeing them.
again great job. i just bought my first vette friday it 1979 can't wait to get it home so i can start playing too. have a great day
:thumbsup:
Man, Ive been sick as a dog so I haven't been able to do a thing.... I'm just now getting back to work.....
I'll PM ya'.
Are you going to Barrett Jackson this year? Some of the ACE peeps will be there Saturday. Keep an eye open for the Arizona Corvette Enthusiasts shirts.....
AM
I'll PM ya'.
Are you going to Barrett Jackson this year? Some of the ACE peeps will be there Saturday. Keep an eye open for the Arizona Corvette Enthusiasts shirts.....
AM
Joined
·
797 Posts
I just shot you back a PM. I've almost got the body ready to drop back on the frame, and it would be a great time for a pizza/beer event in my garage. I have a hoist rigged up (attached in the attic) so no heavy lifting. 1st or second weekend in March sounds about right - I have to finalize some prep work and make sure I have all my parts. I'm near Germann and Alma school in Chandler, real close to the Santan Fwy.
My son (17) and I will likely make a run to BJ - either Friday afternoon or Saturday. I know a few guys from here and CF are making an appearance.:cheers: I'll look for you guys!!!
Cool!!!! I put this on the ACE calendar and started a thread in the events page.
Looks like you'll have more help than needed but that's better than not enough.
AM
Looks like you'll have more help than needed but that's better than not enough.
AM
Joined
·
797 Posts
My son has a hockey tournament in Dallas so I won't be able to join. I just posted up an update of the project over at ACE so folks can try and remember who I am ;-)
1 - 13 of 13 Posts
