Joined
·
7,797 Posts
I am looking at getting http://www.meziere.com/ps-466-435-wn0019r.aspx for my 402 LS2 swap in my '00. Anyone use one or have experience with it? Just wondering about its fit and if it uses a reg thermostat.
Anyone use one of these thermostat housings?
1 - 3 of 3 Posts
Joined
·
1,076 Posts
Just my personal opinion, here, but, I think that part falls into the "if it don't go, chrome it" catagory. Can't see where it would help performance. Just some eye candy.
However, I do use the Meziere electric water pump on my ProCharged C6. It flows constant 55 gph vs. the stock pump, where the capacity is based on enginse speed with a 22 gph max.
In comjunction with my Ron Davis radiator and LPE oil cooler, I've never experienced any cooling issues, even with 100 degree temps and hard running.
However, I do use the Meziere electric water pump on my ProCharged C6. It flows constant 55 gph vs. the stock pump, where the capacity is based on enginse speed with a 22 gph max.
In comjunction with my Ron Davis radiator and LPE oil cooler, I've never experienced any cooling issues, even with 100 degree temps and hard running.
Joined
·
7,797 Posts
Oh i know it wont do anything for performance. Im puttinf a polished edelbrock victor pump on it anf just think the stock ls2 housing will look out of place
1 - 3 of 3 Posts
