Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 14 of 14 Posts

· Registered
Joined
·
283 Posts
Discussion Starter · #1 ·
Picked up the A6 after twin turbo install.
Baseline numbers were 344rwhp/347tq with LG's, Halltech and no tune.
The final numbers netted me over 200hp gain AT THE WHEELS!!!

Having an auto tranny I was expecting about 500rwp but have to say I am very impressed with this kit and LAPD's clean install. Looks like it came this way from the factory!

We also installed a turbo cam: 222/222 581/581 115, and 3" APS exhaust so that is a contributing factor to the numbers as well.

Car is making 480tq @ 3000rpm:surprised and pulls insane. Runs like stock until you stomp on it. Absolutely zero turbo lag, surging/bucking and idles at 600rpm with very little shake.

APS 3" exhaust is awesome as well and sounds friggen bad ass. This car is such a blast to drive now. Power is overwhelming the tires after 2500rpm however, and will break loose very easily. I'm learning to control it by feathering the accelerator for now until I shed the runflats for some sticky tires.

Big thanks to Shawn, Al, Doug, and all the crew at LA Performance Division.:thumbsup:
 

· Registered
Joined
·
3,404 Posts
Holy god over 550 rwhp auto tranny :surprised if you dont mind me asking how much did everything run you?

Pics and vids pleasseee!
 

· Registered
Joined
·
283 Posts
Discussion Starter · #6 ·
Congrats bro sounds like an absolute monster, enjoy the drive, any videos of your pimped auto?
I'll try and record something as time permits. That is if I can figure out how to post it?:laughing:

Also have dyno graph if anyone knows how to post it.
 

· Registered
Joined
·
179 Posts
I'll try and record something as time permits. That is if I can figure out how to post it?:laughing:

Also have dyno graph if anyone knows how to post it.

John, here you go: :thumbsup:



What an AWESOME ride it must be!!! Congrats on the new power adder and hope to meet up at a future GTG. :)
 

· Registered
Joined
·
283 Posts
Discussion Starter · #8 ·
Thanks Bro.

Hope to meet up with you soon.
:cheers:
 

· Registered
Joined
·
475 Posts
Congratz bro! I saw your beast while I was at LAPD, getting the dyno tune a few weeks ago! great stuff That is really impressive for an auto! any reinforcement for auto trans? will she hold at those huge levels?:thumbsup:
 

· DC Crew
Joined
·
5,505 Posts
:partyon: Can't get much cooler than that! What size turbos does APS run?
 

· Registered
Joined
·
283 Posts
Discussion Starter · #12 ·
Congratz bro! I saw your beast while I was at LAPD, getting the dyno tune a few weeks ago! great stuff That is really impressive for an auto! any reinforcement for auto trans? will she hold at those huge levels?:thumbsup:
No tranny changes yet. A6 seems to hold up well to the power. The rear-end may be the weak-link though as some have found out.

One issue I have currently is at times it doesn't want to shift at WOT when using the paddles.:huh: Tried it on a 1-2 shift today and I hit the paddle twice and it failed to shift. My guess is the car accelerates faster than the computer can read. This has been an ongoing problem with some that installed headers etc especially when the tires loose traction.
 

· Banned
Joined
·
147 Posts
No tranny changes yet. A6 seems to hold up well to the power. The rear-end may be the weak-link though as some have found out.

One issue I have currently is at times it doesn't want to shift at WOT when using the paddles.:huh: Tried it on a 1-2 shift today and I hit the paddle twice and it failed to shift. My guess is the car accelerates faster than the computer can read. This has been an ongoing problem with some that installed headers etc especially when the tires loose traction.
THAT'S AN AUTOMATIC KICK ASS MACHINE!!!
 

· Registered
Joined
·
283 Posts
Discussion Starter · #14 ·
I have a video taken from my PDA I just need someone to convert the file/host it! :cheers:
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top