every thing will have to be mocked up. from the hot pipes to cold ones. Mainly now just fitting alt/ps/ac. Moved the alt to the other side. the ps is upper higher and ac will belocated on the bottom passenger side. I have to get all the drive acc in place then figure out how I am going to run exhaust and make all of it fit in a C4.
I have the motor sitting in after getting a 92 up k member. No pic as camera was at home Friday. The Quick time BH fit real good to the motor...no trans installed yet. I am 3/4 inch away from the orginal placement of the BH and no fiberglass has been cut. I am going to have to change brake boosters so I can run the down pipe. Trying to decide if I want hydra boost of go with a dual diafram 7 inch booster. For oil pan I had to moddify a truck pan to have room for the hot side of the turbo.