Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,480 Posts
Discussion Starter #1
man i have seen posts and can not find thembut getting ready to go to town and need to get the bolts to mount the headers to the bell housing in my lg lt header install tonight
 

·
Registered
Joined
·
94 Posts
They are the same thread as the manifolds to stock cats. They need to be about an 1 1/4". Have fun these are a real treat. I spent about an hour on these with my LG's. Good luck... be patient.
 

·
Registered
Joined
·
286 Posts
sdowney said:
man i have seen posts and can not find thembut getting ready to go to town and need to get the bolts to mount the headers to the bell housing in my lg lt header install tonight
sdowney, you are going to have an ear to ear grin when you feel the low-end torque improvement after adding LG's. I took the LG lt's off the 05 MN6 about three months ago and finally added them to the 06, and what a difference! A6 felt like it had no torque before LT header install. Now it's soooo much better. I would ceramic coat as well. I coated this time around, and havn't gotten a CEL yet.
 
1 - 4 of 4 Posts
Top