Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
61 Posts
I made my own by grinding down my pointed air chisel bit and drilling a recess into it. Then I turned the air pressure on my air chisel down and used a body dolly as the backing on the flat side.
Works pretty good though its a 2 person operation for a lot of the brackets
 

·
Registered
Joined
·
25 Posts
I made my own by grinding down my pointed air chisel bit and drilling a recess into it. Then I turned the air pressure on my air chisel down and used a body dolly as the backing on the flat side.
Works pretty good though its a 2 person operation for a lot of the brackets

:agree: That's what I do. Need 2 people however. Chuck
 
1 - 3 of 3 Posts
Top