Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
470 Posts
Discussion Starter · #1 ·
I finally found a shop here selling english bolts so I will pass an order

What are the common sizes found on a vette that I should order?
 

·
Registered
Joined
·
2,948 Posts
It kind of depends what you're working on. Lots of screws and U-clips on a Vette, but if I had to say the bolt size I most commonly use is 3/8-24. Mostly that's drive train though.

It would be a smart idea though to buy an assortment or bolt sizes, lengths, and some matching washers both standard and locking. Stainless, and at least grade 5.

See if that shop sells an SAE assortment kit.
 

·
Registered
Joined
·
2,002 Posts
See if you can find one of these:


The Parts and Illustration Catalogues came out every year. Look for one dated after your model year.

Bolt and screw sizes are usually listed.

Remember: most fasteners on C3s are SAE; very little metric sizes.

:thumbsup:
 
1 - 4 of 4 Posts
Top