Joined
·
30,448 Posts
C6: Euro Conversion
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
C6 Zo6 Rear Diffuser
Articles - BodyWhat’s up community! Have a question. Want to get a carbon fiber rear diffuser for my ‘08 Z, and notice some come with the back up light option and some are deleted. So with the delete option do you tie off the wires or rewire them somewhere and use another spot such as a brake light with a...- 2
- 272
-
C6: Euro Conversion
Articles - BodyThe objective of this post is to share with my friends from DC the journey I have undertaken to make my 2008 C6 Z51 Corvette compliant with current European specifications. I purchased this car during my 3 year expatriation to New York (2007-2010) and it had to be compliant before my return to...- 9
- 44K
-
Fluffy · updated
-
DIY - C6: Sound and Heat insulation
Articles - BodyHi, On the internet you can see many things, sometimes opposite, when it comes to sound and heat insulation. Anyway after some researching I decided to insulate my 2008 C6 for several reasons. The primary initial motivation was the heat insulation of the trunk that gets very hot due to the...- 5
- 19K
-
Fluffy · updated
-
C4: Side Window Alignment
Articles - BodyIf your passenger or driver side window is scraping paint off the "A" pillar of your C4, the common cause is due to a broken window guiide. The following steps may help you fix the problem. When I was having the same problem, there were only two items that needed to be corrected. 1) Replace...- 1
- 16K
-
VetteUSA · updated
-
C3 Body Mount Replacement
Articles - BodyA lot of guys dread this project because there are a few things that can go wrong and really ruin your day. If you discover significant rust at any of the mount locations it can mean welding on new frame mounts and cage nuts. However, if your frame is generally in fair to good condition I...- 1
- 33K
-
lsejlowe · updated
Join now to ask and comment!