Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 8 of 8 Posts

· Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Hello every one ,

I had alot of codes in the car but now i fixed them all and there is no codes now. Also there was a small computer on the passenger side infront of the car which it wires were messed up but now fixed.

so when ever i start the car and put it in "D" and move a bit the car shuts off suddenly same thing when i put it in reverse. but sometimes nothing happens and the car move fine .

so what wrong with the car it's been weeks and i'm not figuring it out ..

so i really need help ..

thanx in advance guys ..

Regards.
 

· Premium Member
Joined
·
17,452 Posts
Sounds like you may have a loose ground, or a loose connector some where. Hopefully some one on DC knows what ckt's are involved when putting it in D or R.
 

· Registered
Joined
·
8 Posts
Discussion Starter · #4 ·
Thanx guys for replying.

Anyway, today we took the steering wheel of and the problem was from the steering lock with a sensor inside it which was not working and replaced it with a new one and everything now is ok.

One more problem that the lights wont go off till after like 10 mins , so where can i fix that ?? help needed

i'm new for corvettes.:rolleyes:

Regards
 

· Registered
Joined
·
3,827 Posts
Cool ,Glad to hear you got her fixed.I'll have to remember that in case it happens to me.
 

· Registered
Joined
·
2,186 Posts
Thanx guys for replying.

Anyway, today we took the steering wheel of and the problem was from the steering lock with a sensor inside it which was not working and replaced it with a new one and everything now is ok.

One more problem that the lights wont go off till after like 10 mins , so where can i fix that ?? help needed

i'm new for corvettes.:rolleyes:

Regards
there maybe a module for int. lights delay
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top