Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 3 of 3 Posts

·
DC Crew
Joined
·
32,974 Posts
Open the hood and take the covers off the headlights. You will probably need to remove the wheel wells to get at the screw on the outside. Once those are off just take the trim ring off and unplug them and take them out.
 

·
Registered
Joined
·
165 Posts
It's a lot easier if you stop the rotation of the doors at the half way point, so you can get to the screws easier.
1. Pull your headlight switch out all the way.
2. Push the switch in all the way, and then immediately pull the switch out to the parking light position.
3. You might have to try this a couple of times to get your timing just right!
4. Follow RaidMagics procedure, but you won't need to remove your wheel wells.

:buhbye:
 
1 - 3 of 3 Posts
Top