Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 4 of 4 Posts

·
Premium Member
1992 C4 LT1 (Y5.7P) A/C C68
Joined
·
15 Posts
Discussion Starter · #1 ·
Have 1992 LT1 (P) base corvette.
How do I remove the Fuel Injector Clip to replace the Injectors? As you know the 2 clip arms attach to the rail sides.
The clip moves side to side a little, but the movement doesn't remove the injector. What am I doing wrong? Can't locate any Clips. Where can I buy some new Clips or is there a suitable substitute for this Clip? Any help would be appreciated.
 

·
Registered
1996 Collector's Edition
Joined
·
1 Posts
The clips work like a C-clip. They slide on the rail. You just have to slide them off the injector by pushing on both arms of the clip at the same time. You might need something to push with. They are kinda rough on the fingers. Once the injector is released from the clip, the clip remains attached to the fuel rail.
 

·
DC PIT CREW BOSS
Joined
·
43,432 Posts
Thanks wxo and welcome to DC
 

·
Premium Member
1992 C4 LT1 (Y5.7P) A/C C68
Joined
·
15 Posts
Discussion Starter · #4 ·
The clips work like a C-clip. They slide on the rail. You just have to slide them off the injector by pushing on both arms of the clip at the same time. You might need something to push with. They are kinda rough on the fingers. Once the injector is released from the clip, the clip remains attached to the fuel rail.
Thanks I had no idea how to tackle this.
 
1 - 4 of 4 Posts
Top