Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
540 Posts
Discussion Starter · #1 ·
I got the Vett back on the road today kinda I put the new trans back in and took it for a spin First I still trying to get the TV cable Adjusted the car will not shift.

I also getting code 42 and 44 I looked them both up I can Find the (EST) Electronic Spark Timming on mt !986 Vett where is it what looks like.
The next code is Code 44 I know where the O2 Sender but why it it showing Lean.

The Car started run very ruff almost died I limb back home it died pull in to the garage ???.


It has a aftermarket Chip In the car due to the motor mods could this be my problem or where should I be looking at now.
 

· Registered
Joined
·
543 Posts
On my car, it is a single tan wire near the brake booster.

I would set the timing first and erase that code by unplugging the battery.

However, lean code tells me that it might be a short in the left bank injectors. Check for pulse with a noid light on all the left side injectors. Also check what the ECM is seeing by either using a scanner or tapping into the O2 sensor.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top