Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,151 Posts
Discussion Starter #1
My top fits well around the windows so I'm thinking the front of the top is installed/Adjusted properly but I can't snap it in back!
not even close it's about 2 inches from the receivers
It's a newer ecklers top... I've even soaked it down real good weighted it down and let it sit in the hot Florida sun with no luck.
Am I missing some adjustment ??? any Ideas would be Very helpfull:buhbye:
Save the wave!!!
 

·
Premium Member
Joined
·
11,627 Posts
JCswm said:
My top fits well around the windows so I'm thinking the front of the top is installed/Adjusted properly but I can't snap it in back!
not even close it's about 2 inches from the receivers
It's a newer ecklers top... I've even soaked it down real good weighted it down and let it sit in the hot Florida sun with no luck.
Am I missing some adjustment ??? any Ideas would be Very helpfull:buhbye:
Save the wave!!!

I put an Ecklers top on a 68 I had a number of years ago. Don't remember having that problem tho. Have you tried locking the rear down and then gently stretching the top towards the front.
 

·
Registered
Joined
·
2,151 Posts
Discussion Starter #4
Yes.... when i soaked it & let it sit in the sun the back was latched and several phone books were on the top weighting it down.
it didn't work
 
1 - 4 of 4 Posts
Top