Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
I recently bought a ZIP products repro belt for my 327/350. When I put the new belt on it was slightly big as I had to pull the alternator all the way back to the end of the bracket and it was still too loose. The old belt that I had was a GATES brand which after looking up the part # it was used for both the 327/350 and 327/300 motors. It measured about 53", while the Zip measured 54". Did the 2 motors, (350hp and 300hp) have different pulley sizes and if so what were they? My 327 has no ps,ac or smog equip.

Thanks, MC
 
1 - 3 of 3 Posts
Top