Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
It was a pain getting the '04 tips off since they are spot welded on top and bottom! A grinder and chistle took care of that, so don't be intimidated, just prepared. They look and sound good, especially with the exhaust by-pass recently done.:thumbsup:
 

·
Registered
Joined
·
3,963 Posts
Lets see some pics of those shiny new tips:thumbsup:
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #3 ·
Sorry, still wrestling with the camera thing. They are the stainless, rolled lip, slantcut, approx. 31/2" dia @ $125. :thumbsup:
 

·
Registered
Joined
·
169 Posts
It was a pain getting the '04 tips off since they are spot welded on top and bottom! A grinder and chistle took care of that, so don't be intimidated, just prepared. They look and sound good, especially with the exhaust by-pass recently done.:thumbsup:
More details would be appreciated. Clamp on or weld on?

post somepictures!

Go to photobucket.com. Once registrated, open an album and download picture(s) directly from your computer following the easy to use instructions.

Once the picture is downloaded, you need to get its URL in order to post it on the forum. Under each picture are 4 boxes, hover your curser over the bottom box, left click the text in the box. A popup should appear right next to the box that says "copied".
Now come to DC ( or any other website you wish to post to) and simply right click in the message box of the post you are making, and then left click on paste.
Thats all there is to it, and its FREE!
 
1 - 6 of 6 Posts
Top