Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1 (Edited)
I have the opposite problem of dash lights going out. Mine are on constantly. The display shows the tach and speedo at max.as well as the fuel and temp, & oil pressure. I can't read the gauges. I am getting info back to the ODB1 port, I checked this with my scanner, and get temp and speed readings. Any suggestions?

thanks,
crete

p.s. can anyone tell me how to attach a picture?
 

·
Registered
Joined
·
21 Posts
It sounds like you are having the same problem as me. I just posted this yesterday

http://www.digitalcorvettes.com/forums/showthread.php?t=75045

Were you changing you bulb sockets when the problem started? What I found was when I went back and loosened the connectors between the two boards in the cluster that the dash worked as normal. (see pics D & E in the link below)

http://www.corvettemagazine.com/1999/dec99/dash/dashp6.asp

However now my whole dash is dark which leads me to believe I also have a ground issue.

Hope this helps. :thumbsup:
 

·
Registered
Joined
·
5 Posts
Discussion Starter #5
Funder Thanks for the link. Ive got the dash apart but I haven't removed the cluster yet. Once I get it out I'll try to clean the contacts and see what happens. I'll let you know how I make out.
Crete
 
1 - 5 of 5 Posts
Top