[Double_Take]

I came out to the car yesterday and noticed a new puddle under her near the rear (im used to puddles in the front). After a little cursing, i jacked it up and took a closer look. The front seal of the diff is leaking slightly. I can imagine what happens when I run out of fluid in there, so what are my options? Is there a refill hole in the diff case somewhere? How big a job is it to replace what is broken?

I figure at least I have to take out the drive shaft. Can everything else be done while its in the car?

Thanks in advance guys.

 

[big2bird]

http://www.digitalcorvettes.com/forums/showthread.php?t=76719

 

[Double_Take]

Thanks. The one time I dont do a search. :toilet

 

[gtr1999]

Follow that post. Be sure to witness mark the yoke and nut if doing this on the car. Check the pinion yoke OD you may need a speedy sleeve. Use #2 on the splines. I should have all that in the post.

 

[Double_Take]

Im hoping I get a chance this sunday to tear into it. I just got the thing driving well so its painful to put it back up onto stands.

:down: