Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
271 Posts
Discussion Starter #1
Thought this would give a good basis of how much power you can expect on a Z with some decent mods done to it...

 

·
DC Crew
Joined
·
53,222 Posts
Through my firewall, or plugged into my DMZ, same thang.

Forbidden
You don't have permission to access /s/image7/4/1/4/85740104zeNhrc_ph.jpg on this server.
--------------------------------------------------------------------------------
Apache/1.3.27 Server at community.webshots.com Port 80



Are you sure your host allows outside linking?
 

·
Registered
Joined
·
271 Posts
Discussion Starter #5
Patrick96LT4 said:
Through my firewall, or plugged into my DMZ, same thang.

Forbidden
You don't have permission to access /s/image7/4/1/4/85740104zeNhrc_ph.jpg on this server.
--------------------------------------------------------------------------------
Apache/1.3.27 Server at community.webshots.com Port 80



Are you sure your host allows outside linking?
:laughing: :laughing: Ya gotta love computers sometimes...Now this HAS to work as I put it on my webspace...

 

·
Registered
Joined
·
271 Posts
Discussion Starter #7
Patrick96LT4 said:
Is that a real dyno pull? The graph looks too smooooth.
As far as I know yes...It was from a webpage on webshots with a yellow Z06 that a guy races from what I can tell. I think it is a real dyno sheet. It just goes to show that to make some SERIOUS HP you really have to do some serious mods...
 
1 - 8 of 8 Posts
Top