Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
550 Posts
Discussion Starter · #1 ·
The rear end is doing well... but I need some suggestions on a front sway bar...

I plan on making it adjustable and use 3/8 CR rod ends.

I'm gonna cut the stock ends off and mill a 1/4" vertical slot to fit a piece of CNC plasma cut 1/4" plate to tig weld in. Said plate will have 3 holes stock +1" and -1" longitudinal that will allow me to lengthen or shorten the arm.

the $129 question is which bar to start with.... I'm thinking 1.25 tubular

I have a 1" bar now and it's so not enough :huh:
 
1 - 3 of 3 Posts
Top