[TX Vette Driver]

Just joined and am currently doing a restomod on a 1980 Corvette. I have the drive train complete and in the frame and parked in the garage. The body is on a frame and I'm currently stripping the paint in preparation for body work and painting. I was drawn to Digital Corvette's by an old post by 7TRoadster on painting Corvette's and I've been following his advice on getting mine prepped. An Old Man's Guide to Painting a Corvette
My car has a 383 Stroker and I've installed a Holley Sniper EFI along with a HyperSpark distributer and roller lifters. Also, replaced the TH350 with a 700R4 Transmission.
Here is a video of the first start after getting the power train back together on the frame:

Corvette with 383 Stroker first start during frame off restoration

Since I was adding a Holley Sniper EFI and Hyperspark ignition to the 383 Stroker in my '80 Corvette I decided to set it up to start it and let it run in a l...

www.youtube.com

Anyway, looking forward to getting more help and advice on this rebuild.

Regards

Mark

 

[Triple dizzle]

Welcome to DC. Looks like you have it under control. The roller looks very professionally done. Good luck with the paint.

 

[TX Vette Driver]

Welcome to DC. Looks like you have it under control. The roller looks very professionally done. Good luck with the paint.

Thanks for the welcome. I appreciate it.

 

[The Torch]

Welcome to DC. Looks like you are on the downhill side. Keep us posted on your progress