Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
2,350 Posts
Discussion Starter · #1 ·
You should see the dust coming out of my brakes with these brake pads[hawk blues]. Also my rotors are noticeably worn after a few runs (just visibly nothing major). Although it was after I bedded them. Should look like the c6-r after a track weekend :cool:

I noticed that my front tires seem to lock up very easily. Seems like my rear brakes aren't getting enough pressure. I'll just use a brake bias adjuster for the front to reduce pressure. What adjuster would you guys recommend? Should I get an in car one?

I also want a longer pedal. A smaller bore MC does that correct?

My first Auto-x is this sunday :devil:

I won't be able to do the brake bias and MC untill after the Auto-x

I also made a lightweight battery tie-down to be within the rules
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top