Corvette Forum : DigitalCorvettes.com Corvette Forums banner

Hood Emblem Remove

2157 Views 2 Replies 3 Participants Last post by  LaxManiac26
I will like to now if the paint on my hood is going to be damage if i remove the Hood Emblem to put a new one and how can i remove it ::thumbsup:
thanks and advance and regard ::thumbsup:

CUVETTE
1 - 1 of 3 Posts
You can use floss or fishing line the thin stuff. The front emblem has two pins on the left and right side for allignment. The rear one has no pins or holes to deal with. Don
:agree: Unless you want to fill in the two holes for the pins I wouldn't take the front emblem off and when you do fill in the holes alot of the time the filler wont expand and contract at the same rate as the hood itself in hot and cold temperatures and you will slightly be able to see the difference. But hopefully you will figure it out
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top