Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
114 Posts
Discussion Starter · #1 ·
How difficult is the hypertech power programer III to use....is it simple? If you have used it were you pleased?

Thanks



:thumbsup:
 

·
Registered
Joined
·
47 Posts
easy to use -however - I had a bad experience with mine, it
killed my pcm unit! I had to send the pcm and the programmer back to hypertech - my pcm had to be re-flashed. They did send
me a new programmer - but I havn't used it.:cheers:
 

·
DC Crew
Joined
·
53,226 Posts
Easy to use. But, it simply isn't worth the time or money. I picked up zero HP and zero TQ . I ended up removing the programming because the car was running strange when it was very hot out.
 

·
Registered
Joined
·
8,067 Posts
I used one on my 98. Biggest problem I had was removing the "tune"when I sold car. I used it to set shift points higher (more prm per gear) and to turn fans on sooner for cooling. The cooling was the biggest advantage I thought.
 

·
Registered
Joined
·
336 Posts
With a six speed you may see little to no gain but on an auto car you should see some improvement with properly adjusted shift points, do a thermostat at the same time and the car will run much cooler with the fans coming on earlier.
 
1 - 6 of 6 Posts
Top