Driver side rear speaker may give you some trouble with the filler neck. I had to put a small dent in the filler neck to get the magnet housing to clear. Run the tweets "shoulder" height on the roof support. You will also have to build "fillers" for the door speakers, as they have 8 inch woofers in them now. Put the 3 ways in the doors and the mids in the rear. The cross overs will fit neatly in the rear driver and pass compartments. You are going to want to buy a good quality amp also. If you plan on running with a new sub woofer buy 2 amps. one mono and one 4 channel.