Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
the 89 vette I just bought with only 72k on it , had from the original owner , a stupid engine disabler ....well it worked fine for years but I unfortunately got stuck with the problem ....the wires all touched together because the 18 year old insulation turned brittle and then the car died ...it fried my ecm and even now that it has been replaced , after hours and hours of time at a garage they can;t pinpoint why else she won't run !!!! what a money pit !!!! can anyone please help !
 

·
Cleaner than Stock, Faster than Phock
Joined
·
726 Posts
You can send your harness to Jim at www.jimsperformance.com and he will repair all connectors and bad wire and do a diagnostic on the harness after it is done, and re-wrap the harness

He did mine and his service totally eliminated all electrical issues that I had previously, like an intermittent ground problem I chased for months

You can get the harness out pretty easily, not a big deal:thumbsup:
 
1 - 2 of 2 Posts
Top