Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
283 Posts
You need the rubber underneath. You'll have to use some washers on the 4 bolts prior to putting the nuts on. On my 95, there weren't enough threads on the bolts after cutting the aluminum brackets to butt up tight against the frame. Also, I removed some of the material on the ends of the spring, not making it shorter, the thickness of the ends of the spring where it lays on the control arm.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top