Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
515 Posts
Discussion Starter · #1 ·
I was wondering if any knew any tricks to putting in a new clutch position switch. I have been playing with mine for weeks and I cant get my hands or tools anywhere near where it has to go. I got the old one out thanks to gravity, but putting the new on in is a different story. Any tips would be greatly appreciated.
 

·
Premium Member
Joined
·
10,489 Posts
I was wondering if any knew any tricks to putting in a new clutch position switch. I have been playing with mine for weeks and I cant get my hands or tools anywhere near where it has to go. I got the old one out thanks to gravity, but putting the new on in is a different story. Any tips would be greatly appreciated.
Clutch position switch? not sure I have heard of this.. where exactly is it located
 

·
Premium Member
Joined
·
17,444 Posts
Sounds like a clutch neutral safety switch. It wont let you start the car unless the clutch is fully depressed.
 

·
Registered
Joined
·
515 Posts
Discussion Starter · #6 ·
Could I be the only one who has had this problem? The manual says to take the pedal assembly out but if there is a way to replace it without having to do that it would be great.
 

·
Registered
Joined
·
257 Posts
I could get to mine easily. Of course I'm 27, 6'1", and 185 lbs. My dad always has to get me to do the things under the dash on his vettes (skinny hands I guess). You might want to remove the driver seat and lay in the car. If you still can't replace it, just tie the wires together and bypass the switch. Easy fix until someone else can get under there.
 
1 - 7 of 7 Posts
Top