Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
512 Posts
darrellwest said:
HI guys

I have a 94 coupe and it is leaking from the rear seal do anybody
know what it will cost to fix the leak?:huh:
If your talking about the rear main seal for the crank shaft, that is a common failure. as for book time I am not shure what they get.. I don't really know what the seal costs but I would think it's pretty cheap... I know it's alot of labor the trans has to be removed and it depends on if it's auto or manual it will be more for stick..

I myself do not really deal with pricing.. I do all my own work and I do not make up the tickets at the shop.. I wish I could be of more help.. sorry....
-Rick
 

·
Registered
Joined
·
15 Posts
I was sure I had a rear seal leak and pulled the engine when I did the HotCam install. It turned out to be the rear of the intake.
It was a good excuse to put in a 3000 stall converter while it was out.

Gordon
 

·
Premium Member
Joined
·
69,122 Posts
Switch said:
I was sure I had a rear seal leak and pulled the engine when I did the HotCam install. It turned out to be the rear of the intake.
It was a good excuse to put in a 3000 stall converter while it was out.

Gordon
I had a leaky intake on my 96, but it wasn't so much of an issue as it was ugly.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top