Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
Finally getting around to replacing the brake switch on my 1990 zr1 to get the third overhead light working. Ordered what I thought was the right part and of course, it appears they sent the wrong one or I ordered the wrong one. Either way, I'm SOL

However, my question is this. The switch for the third light has a line going in which appears to be glued in, and then there seems to be a plug beside it with nothing attached to it. I'm wondering if (assuming that ) there is supposed to be an attachment here? Looks like there should be but there is nothing and there does not appear to be anything to attach to it.

Any help would be appreciated!
 

·
Registered
Joined
·
236 Posts
Finally getting around to replacing the brake switch on my 1990 zr1 to get the third overhead light working. Ordered what I thought was the right part and of course, it appears they sent the wrong one or I ordered the wrong one. Either way, I'm SOL

However, my question is this. The switch for the third light has a line going in which appears to be glued in, and then there seems to be a plug beside it with nothing attached to it. I'm wondering if (assuming that ) there is supposed to be an attachment here? Looks like there should be but there is nothing and there does not appear to be anything to attach to it.

Any help would be appreciated!
How about a picture?Its been awhile but I know there are 2 plugs on the switch.
 

·
Premium Member
Joined
·
10,489 Posts
How about a picture?Its been awhile but I know there are 2 plugs on the switch.
I think the line is the vacuum line for the Cruise control switch, the other is for the brake lights. but it is possible the vacuum line is on the brake light switch.

It has been awhile so a picture may help or I can check my FSM when I get a chance
 

·
Registered
Joined
·
38 Posts
Discussion Starter · #4 ·
jeff -- thanks -- sorry for the delay -- I replaced the right switch with two inputs on it, and the light fired up. What a pain to get at that part. I had to get me wife to pull me out of the car -- fortunately she didn't take video of it...
 
1 - 4 of 4 Posts
Top