I have decided to sell my motor, and get something with a little more power. (Looking at an ARE 422) This motor config has made 430 RWHP w/ cats and no pulleys. All reasonable offers will be considered. Here's some information about my motor:
LS6 heads:
The heads will have a 2.08 intake and a 1.57 exhaust. 1.43" O.D. springs with
Titanium retainers.
Camshaft:
The cam is from Lunati with .575/.575;lift and 243/242 degrees duration @ .050.
Rocker arm kit:
Rocker arms are Jesel at 1.7 ratios I&E.
Head Studs:
12 point (ARP)
Rod Bolts:
Complete (234-6301) (Katech)
Timing Chain:
C5R Timing Chain
Timing Gears:
Cloyes Timing Gear Set
Injectors:
40lb/hr fuel injectors (GM)
Throttle Body:
Ported Throttle Body (Katech)
Will throw in all of my other stock items, i.e. stock clutch, injectors, exhaust manifolds, and injectors. If you’re interested you can contact me @ [email protected]. Also check out http://www.competitiond.com/rob.html for additional information.
I'll even throw in your choice of a new copy of, either XP Pro or Office XP Standard.
Rob
[email protected]
LS6 heads:
The heads will have a 2.08 intake and a 1.57 exhaust. 1.43" O.D. springs with
Titanium retainers.
Camshaft:
The cam is from Lunati with .575/.575;lift and 243/242 degrees duration @ .050.
Rocker arm kit:
Rocker arms are Jesel at 1.7 ratios I&E.
Head Studs:
12 point (ARP)
Rod Bolts:
Complete (234-6301) (Katech)
Timing Chain:
C5R Timing Chain
Timing Gears:
Cloyes Timing Gear Set
Injectors:
40lb/hr fuel injectors (GM)
Throttle Body:
Ported Throttle Body (Katech)
Will throw in all of my other stock items, i.e. stock clutch, injectors, exhaust manifolds, and injectors. If you’re interested you can contact me @ [email protected]. Also check out http://www.competitiond.com/rob.html for additional information.
I'll even throw in your choice of a new copy of, either XP Pro or Office XP Standard.
Rob
[email protected]
