Corvette Forum : DigitalCorvettes.com Corvette Forums banner

Steering Valve...

800 Views 4 Replies 3 Participants Last post by  TwinTurbo
Morning all,

Newbie here. I've been on the Corvette Forum for a while now and have had Big Bird on the job a couple of times. Great guy.

My first question for this forum is regarding the power steering control valve for a '75 auto. I swapped out the hoses and cylinder no problem but what's the trick to swap out the valve? I see the boss end has a spline clamped via the bolt - no problem; and the bracket on the valve to the pitman arm is perpendicular to this fixing. So... how do you drop it? Do you have to undo the pitman arm as well?

Thanks guys...
1 - 2 of 5 Posts
Cheers guys,
I had a look under there yesterday but not wanting to wreck anything I didn't force the issue- but then again I did do the 'man thing' of not reading the manual first....
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top