Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter · #1 ·
There are apparently a few of the key stock A/C components which are no longer available and no reproduction is available. Specifically it seems that the underhood Evaporator box and a "bezel" around the center vent are not available. THese should be relatively easy to reproduce. Does anyone have these items so that I could potentially create a mold?


Poor picture of the Evaportator Box:


Here is the "bezel" show in the upper right of this picture:



There may be other parts not available, but these were two that jumped out at me.
Thanks, :cheers:
 

·
Registered
Joined
·
17 Posts
In my 66 the bezel is metal (probably stainless).

The metal parts are the hardest to find and install, particulary the RH vent replacement which allows fresh air intake or recirculation or fresh air vent (at the halfway position)
 

·
Registered
Joined
·
94 Posts
Discussion Starter · #3 ·
In my 66 the bezel is metal (probably stainless).

The metal parts are the hardest to find and install, particulary the RH vent replacement which allows fresh air intake or recirculation or fresh air vent (at the halfway position)
MagicV8,

Do you have any pictures of that SS bezel?

I don't quite follow on on the "vent".
Do you mean 252195 in this picture
Vent door
 

·
Registered
Joined
·
17 Posts
I looked again - the bezel is black painted steel. The vents in your diagram are not RH for A-C cars. The RH A-C assembly is shown on F311 of the 66 AIM for option c60 drawing d2
 
1 - 4 of 4 Posts
Top