Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
I currently have the louvered covers on the tail lights. I do not want those on there. Is there an easy way to replace the tail light lenses since they now have screw holes in them?:cheers:
 

·
Registered
Joined
·
267 Posts
If you consider an easy way to destroy your hands and arm through the licence plate hole to reach screws from behind...that's the easy way:laughing::laughing:
 

·
Registered
Joined
·
267 Posts
Sorry bro, just listen a lot of guys talking about this boring job,never done ,but i think if you put an hand using your fingers you can recognize what kind, i think you have to remove the first lense near the plate,then you can use the lense housing hole to reach the next
 

·
Registered
Joined
·
543 Posts
Easyer way kinda. this will keep most of the skin on your hands.
Remove the rear tires and inner fenders and use a socket and extention you can get to the outboard lens easy the inboard one just reach though the outboard lens hole to get to them.
 

·
DC Crew
Joined
·
32,974 Posts
They are 10mm all you need is a 1/4" drive rachet. Once you break them loose you can use the socket in your fingers.
 
1 - 9 of 9 Posts
Top