Corvette Forum : DigitalCorvettes.com Corvette Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
1,129 Posts
Not a complete kit.

In order to fully install this kit, you will need to purchase silicone couplers, t-bolt clamps, and turbo oil feed and drain lines for the turbos. You will also need to purchase two wastegates and a blow off valve. Unfortunately we do not sell these items, but you can easily find them at other retailers.

It's no where near the end of sell either.
 

· Registered
Joined
·
2,233 Posts
Not a complete kit.

In order to fully install this kit, you will need to purchase silicone couplers, t-bolt clamps, and turbo oil feed and drain lines for the turbos. You will also need to purchase two wastegates and a blow off valve. Unfortunately we do not sell these items, but you can easily find them at other retailers.

It's no where near the end of sell either.
that the besy way to get it if you ask....
 

· Registered
Joined
·
1,507 Posts
Are the turbos any good - or are they Chineese crap?

Minds well just buy "quality" turbos on your own and fabricate your own plumbing....
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top