Corvette Forum : DigitalCorvettes.com Corvette Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
ok so here is what i have i have made a custom twin turbo set up i hace two 63 a/r turbos have them all hooked up and all pipes run and everything is good here is the problem i am having.....

if i disconecct the turbos pipes going to the intercooler the turbos spool and push loads of air out but as soon as i hook them to the engine my boost will only hit 0 and fades back off and it will not boost. it is a rear mounted system. there is no tune done yet waiting to just get a blow off or reg some boost before i have it tuned so i know they are working. is the computer closing the throtal body on me or is it some other problem. please help been checking and rechecking everything can not find anything wrong with lines or leeks. just will not boost.
 
1 - 1 of 1 Posts
Top